Slide Sledge

Heavy Equipment™ Hammer
Image Library

Precision Hammer

Application Images Logos Product Images Tips and Accessories

Application Images
Right click on a photo below to save the image to your computer. To request high-resolution versions of these images, please contact Customer Service at customerservice@petersenbrands.com or (866) 862-2508.

     

Logos
Right click on a logo below to save the image to your computer. To request high-resolution versions of these logo, please contact Customer Service at customerservice@petersenbrands.com or (866) 862-2508.

 

^ Top

Product Images
Right click on a photo below to save the image to your computer. To request high-resolution versions of these images, please contact Customer Service at customerservice@petersenbrands.com or (866) 862-2508.

Heavy Equipment™ Hammer
Heavy Equipment™ Hammer
Heavy Equipment™ Hammer
Heavy Equipment™ Hammer

^ Top

Tips and Accessories

1/2 " Pin Driver 1/2" Diameter Pin Driver
#25220/213101
Recommended for pins and bolts greater than 1/2" up to 7/8" in diameter
5 lb Handle Weight

5 lb Handle Weight
#1001001/211808
Increases the Slide Sledge® striking force by 5 lbs, works with any of the four tools by threading onto tool handle

7/8 " Pin Driver 7/8" Diameter Pin Driver
#25225/213102
Recommended for pins greater than 7/8" up to 2" in diameter
Curved Chisel Tip Curved Chisel Tip
#25240//213531
1 3/8" tip ideal for chopping away hardened debris & shearing metal bolts and rivets up to 3/8" grade 8
1 1/4 " Pin Driver 1 1/4" Diameter Pin Driver
#25290/213103
Recommended for pins greater than 1 1/4" up to 2" in diameter 		Scarifier Tooth Tip

Scarifier Tooth Tip
#25340/213307
Removes scarifier teeth on most motor graders. The fork design allows the tech. to split the trenching arm where the scarificer tooth is forced fit

2 " Pin Driver 2" Diameter Pin Driver
#25291/213104
Recommended for pins greater than 2" up to 2/5" in diameter		 Tie Rod/Ball Joint Tie Rod/Ball Joint
11/16" - #25211/521
15/16" - #25212/213522
1 1/8" - #25213/213523
1 7/16" - #25214/213524
2 1/2 " Pin Driver 2 1/2" Diameter Pin Driver
#25292/213105
Recommended for pins greater than 2.5" up to 3" in diameter		 Utility Wedge Tip Utility Wedge Tip
#25325/213528
All purpose impact tool designed to separate parts and straighten steel with maximum force
3 " Pin Driver 3" Diameter Pin Driver
#25293/213106
Recommended for pins greater than 3" up to 4" in diameter 		Tie Rod/Ball Joint Separator Adapter Tie Rod/Ball Joint
Separator Adapter
#25210/213520
Attach all Slide Sledge® separator forks and most common forks available today
Ripper Tooth Pin Removers

Ripper Tooth Pin Removers

3/8" Diameter
#25300/213305
Use on pins as small as 3/8" and
up to 1/2" with minimum tooth spacing of 2 3/4"

1/2" Diameter
#25280304
Use on pins as small as 1/2" and up to 3/4" with minimum tooth spacing of 3 1/2"

3/4" Diameter
#25261/302
Use on pins as small as 3/4" and up to 1" with minimum tooth spacing of 4 1/2"

Ripper Tooth Pin Inserters Ripper Tooth Pin Inserters

3/8" Diameter
#25310/213306
Use on pins as small as 3/8" and up to 1/2" with minimum tooth spacing of 2 3/4"

1/2" Diameter
#25270/213303
Use on pins as small as 1/2" and up to 3/4" with minimum tooth spacing of 3 1/2"

3/4" Diameter
#25260/213301
Use on pins as small as 3/4" and up to 1" with minimum tooth spacing of 4 1/2"
Race/Bearing/Seal Adapter Race/Bearing/Seal Adapter
#25321/213526
Install races, bearings and seals with this adapter driver tip. Add drive plates to the end of the adapter in various combinations. Fits plates with a common 9/16" center hole, up to 3/4" high.
Bushing Driver Adapter

Bushing Driver Adapter
#25322/213527
Proper installation of bushings will be accomplished easily and quickly with this adapter driver tip. Fits drivers with a common 3/4" center hole, up to 7'8" high.

Tie Rod/Ball Joint Separator Tip Set Tie Rod/Ball Joint Separator 3 Tip Set
#25209/213519
Slide Sledge® separator adapter and 11/16", 15/16" 1 1/8" forks
   

^ Top