| |
 |
1/2" Diameter Pin Driver |
 |
5 lb Handle Weight |
|
#25220
Recommended for pins and bolts greater than 1/2" up to 7/8" in diameter |
#1001001
Increases the Slide Sledge® striking force by 5 lbs, works with any of the four tools by threading onto tool handle |
 |
7/8" Diameter Pin Driver |
 |
Curved Chisel Tip |
#25225
Recommended for pins greater than 7/8" up to 2" in diameter |
#25240
1 3/8" tip ideal for chopping away hardened debris & shearing metal bolts and rivets up to 3/8" grade 8 |
 |
1 1/4" Diameter Pin Driver |
 |
Scarifier Tooth Tip |
#25290
Recommended for pins greater than 1 1/4" up to 2" in diameter |
#25340
Removes scarifier teeth on most motor graders. The fork design allows the tech. to split the trenching arm where the scarificer tooth is forced fit |
 |
2" Diameter Pin Driver |
 |
Tie Rod/Ball Joint
Separator Forks |
#25291
Recommended for pins greater than 2" up to 2/5" in diameter |
11/16" - #25211
15/16" - #25212
1 1/8" - #25213
1 7/16" - #25214
|
 |
2 1/2" Diameter Pin Driver |
 |
Utility Wedge Tip |
#25292
Recommended for pins greater than 2.5" up to 3" in diameter |
#25325
All purpose impact tool designed to separate parts and straighten steel with maximum force |
 |
3" Diameter Pin Driver |
 |
Tie Rod/Ball Joint
Separator Adapter |
#25293
Recommended for pins greater than 3" up to 4" in diameter
|
#25210
Attach all Slide Sledge® separator forks and most common forks available today |
 |
Ripper Tooth Pin Removers |
 |
Ripper Tooth Pin Inserters |
3/8" Diameter
#25300
Use on pins as small as 3/8" and
up to 1/2" with minimum tooth spacing of 2 3/4"
1/2" Diameter
#25280
Use on pins as small as 1/2" and up to 3/4" with minimum tooth spacing of 3 1/2"
3/4" Diameter
#25261
Use on pins as small as 3/4" and up to 1" with minimum tooth spacing of 4 1/2" |
3/8" Diameter
#25310
Use on pins as small as 3/8" and up to 1/2" with minimum tooth spacing of 2 3/4"
1/2" Diameter
#25270
Use on pins as small as 1/2" and up to 3/4" with minimum tooth spacing of 3 1/2"
3/4" Diameter
#25260
Use on pins as small as 3/4" and up to 1" with minimum tooth spacing of 4 1/2"
|
 |
Race/Bearing/Seal Adapter |
 |
Bushing Driver Adapter |
#25321
Install races, bearings and seals with this adapter driver tip. Add drive plates to the end of the adapter in various combinations. Fits plates with a common 9/16" center hole, up to 3/4" high.
|
#25322
Proper installation of bushings will be accomplished easily and quickly with this adapter driver tip. Fits drivers with a common 3/4" center hole, up to 7'8" high. |
 |
Tie Rod/Ball Joint Separator 3 Tip Set |
|
|
#25209
Slide Sledge® separator adapter and 11/16", 15/16" 1 1/8" forks |
